Envelope command does not automatically create external ports where connection lines cross the envelope

Envelope command does not automatically create external ports where connection lines cross the envelope

To solve the issue, you must change UCS to World.

​

 On command line

1. type UCS and press ENTER

2. type W and press ENTER

    • Related Articles

    • How to Create an Electrical Wire Connection

      To create a wire connection, follow these steps: Open the Connection Lines section of the Connections in HyDraw Library Manager. Click New to create a new connection line: • Provide a name for the connection. • Set the Application as Electrical. • ...

    • How to change the connection point geometry for symbols

      In order to change the port symbol, please follow the below steps. The below includes an example on how to change the port symbol to a circle. Identifying the Port Block Name 1. Please open the Blocks palette within HyDraw by typing in ...

    • Making Connection Lines causes HyDraw CAD to crash

      Often times this is due to a graphics issue. A set of solutions exists: 1. Ensure that the Hardware Acceleration is turned ON To do so, you may have to select Graphics performance within the customizations menu for the icon to appear: Right click the ...

    • How to Add a New Display Format to a Connection Line

      Follow the steps below to create a new display format for connection lines in HyDraw Library Manager: Open the Model Properties of the Connections in HyDraw Library Manager. From the property list, select any property that you want to display (e.g., ...

    • My connection lines are not forming 90 degree bends or are diagonal after adjusting them, how do I fix the diagonals?

      Ensure that your connections have Auto Connect turned on in the ribbon menu to make connection lines automatically between two connection points: To change the diagonal connection lines within your drawing, type in RESETCON into the command line and ...