Every symbol inserted has an extra number 1 for each port.

Reason: This issue occurs when the system variable ATTDISP is set to ON in the template. 

How to fix the issue:

To resolve the issue, please run the ATTDISP command and set its value to NORMAL to hide the invisible attributes.

• Related Articles

• How to change the connection point geometry for symbols

  In order to change the port symbol, please follow the below steps. The below includes an example on how to change the port symbol to a circle. Identifying the Port Block Name 1. Please open the Blocks palette within HyDraw by typing in ...

• How to create a new symbol from an existing one?

  The attached video shows how to create a new symbol from existing one and how to assign an existing part number to it.

• HyDraw CAD Stuck in Symbol Builder Mode. How can I get back to regular Drawing Space?

  Issue: Symbols brought into the HyDraw CAD workspace are in an exploded state with no Item ID asset tag displayed. Cause: This is due to the Symbol Build Mode not being closed correctly (For example, using undo to exit symbol build mode) Resolution: ...

• HyDraw CAD Metric and Imperial standard Templates

  Latest HyDraw CAD standard templates for Imperial and Metric can be downloaded from the attachment. Download the zip file, unzip and place the template files (.dwt) at the desired location. Default template path location: ...

• How to Change Color of Solenoid Energized state Symbol in Actuation Chart

  Insert a Directional Control Valve Symbol in a Drawing. Add Solenoid Information using Solenoid Info command.      3. Go to System Tab, select Actuation from Ribbon, and create the Actuation Table.       4. Select the Actuation Table in drawing and ...