How do I change the line properties (color) for multiple lines without having to select them individually?

• Related Articles

• How to Change Color of Solenoid Energized state Symbol in Actuation Chart

  Insert a Directional Control Valve Symbol in a Drawing. Add Solenoid Information using Solenoid Info command.      3. Go to System Tab, select Actuation from Ribbon, and create the Actuation Table.       4. Select the Actuation Table in drawing and ...

• Upon trying to change the background color of the model space, the dialog does not appear

  Problem: Upon selecting the colors option within the AutoCAD options, no dialog appears: Solution: There are multiple solutions to this problem. The first solution to try should be to locate the dialog. This can be done by using the ALT+SPACE ...

• When opening a drawing, my lines are suddenly very thick. What happened?

  Issue: When opening a drawing, the lines are suddenly very thick. Solution: This is due to the lineweight being displayed. To turn the lines back to normal, type LWEIGHT into the command line and uncheck the 'Display Lineweight' check box

• How do I display the line weight for connection lines?

   Type “LINEWEIGHT” on the command line. The Line Weight Settings dialog box is displayed.  By default the ‘Display Lineweight’ checkbox is deselected. Select the Display 'Lineweight’ checkbox and click OK. Set the Line Weight value inside HyDraw ...

• Why do dashed lines in symbol appear as continuous lines in the drawing?

  This may happen if the line type scale factor is too high. Change the line type scale to make the lines appear as dashed lines. On the command line type “LTS (LTSCALE)”and press Enter. The command line will display the current line type scale, enter ...