How do I insert only a specific view of the model in the drawing and then create the dimensions using the Auto Dimension command?

• Related Articles

• What to do if the dimensions view start from a dimension other than the origin (0,0)? (Applicability: MDTools 770 (IT/EN))

    The issue is with the Ordinate Dimension Origins option in the Drawing template. Follow the steps in the attached Drawing file to resolve. 1. Deselect Origin Indicator from Options of Styles Editor> Dimensions. 2. Run MDTools 770 > Auto Dimension. ...

• How to link block dimensions in the model to the title block in the drawing?

  To link the block dimensions in the drawing so that they automatically update, Set up a SolidWorks Part file as a template with properties that reference the dimensions (with block drawn so you will need one for both units) and a drawing template ...

• Auto Drawing always places drill charts on same sheet as views.

  Auto Drawing drill charts may be incorrectly placed on the same sheet as the views, if you are using a template. This can be caused by the default name of the first sheet, Renaming the sheet corrects this.

• How do I hide construction ports in the drawing?

  Use the MDTools "Suppress Cavity" command to hide the construction ports on the part model before creating the drawing. The command can also be used to hide any drill holes or angled holes that you don't want to show in the drawing. Alternatively, ...

• How can I split and insert the Machining chart on multiple sheets?

  Currently, MDTools does not have the option to insert the machining chart on multiple sheets in a drawing in a single instance. The command must be run separately each time for a new sheet in the drawing. For example, to create Views on Sheet 1 and ...