How to proceed if the MDTools browser is not visible and I cannot insert cavities from the library?

• Related Articles

• Cavity created in MDTools Library Manager is not visible in MDTools

  There might be the issue with library settings. User need to make sure that they are using same Library and Units setting in both MLM and MDTools. Any Cavity created in MLM with mm settings will be available in MDTools with mm settings only. Changing

• How do I move cavity from one manufacturer folder to another within the same MDTools library?

  Go to Cavities. Select the new manufacturer library you want to import the cavity into. Click Add. Click Import Cavity Data and select a cavity. Delete the cavity from the original manufacturer library folder if desired.        

• Unspecified error while inserting cavity.

  If you get an 'Unspecified error' while stating a new part file or inserting a cavity in a newly created block, apply the following. If MDTools cannot find the library, ensure the following: Ensure you have full permissions to 'Users' for folder ...

• When I try to insert a cavity I get an unhandled error? How do I resolve the issue?

  If you see the following error message when inserting a cavity, it is most likely you do not have full permissions to the settings folder of MDTools. Provide full permissions to the user profile for the following folder. C:\ProgramData\VEST\MDTools ...

• When inserting or editing a cavity, does some cavities disappear? (Applicability MDTools 965 and higher)

  Feature failure issue is due to zero-thickness geometry limitation of SolidWorks and is resolved by deselecting the highlighted setting from the SolidWorks settings. Go to System Options > Performance, then deselect the highlighted option as shown ...