My connection lines are not forming 90 degree bends or are diagonal after adjusting them, how do I fix the diagonals?

Ensure that your connections have Auto Connect turned on in the ribbon menu to make connection lines automatically between two connection points:

To change the diagonal connection lines within your drawing, type in RESETCON into the command line and hit enter, select the diagonal connection line, and hit enter on the keyboard. The lines should then be adjusted to only make 90 degree bends

To make adjustments to connection lines, use the stretch command.

• Related Articles

• Making Connection Lines causes HyDraw CAD to crash

  Often times this is due to a graphics issue. A set of solutions exists: 1. Ensure that the Hardware Acceleration is turned ON To do so, you may have to select Graphics performance within the customizations menu for the icon to appear: Right click the ...

• When plotting, how can I keep the connection line colors but make the valves black?

  Save the attached file, LineColor.stb, to the following folder: C:\Users\%username%\AppData\Roaming\VEST\HyDraw CAD 2024\R2024\enu\Plotters\Plot Styles. Open HyDraw CAD. In the ribbon menu, select "Drafting", and open "Layer Properties." In the Plot ...

• Why do Connection lines move around after saving the file?

  Applying AutoCAD constraints to the connection lines sometimes causes the connection lines to move around when the drawing is saved. Do not add the AutoCAD constraints to HyDraw connection lines.        

• How do I display the line weight for connection lines?

   Type “LINEWEIGHT” on the command line. The Line Weight Settings dialog box is displayed.  By default the ‘Display Lineweight’ checkbox is deselected. Select the Display 'Lineweight’ checkbox and click OK. Set the Line Weight value inside HyDraw ...

• Only parts of the drawing appears on the print preview screen (lines are missing, text is missing, dimensions are missing.). How do I fix this?

  The issue is with "Defpoints" layer, all objects that are not printed, are on that layer. This is a default AutoCAD layer set as 'do not print' (as a rule don't use that as drawing layer). To fix the issue, select all drawing objects and change their ...