The dashes of the line do not have correct spacing or display Continuous. (Applicability HyDraw CAD 2019/2020)
When the foreign dwg drawing (not created using AutoCAD or HyDrawCAD) is opened in HyDraw CAD, then following are recommended for using HyDraw Connection lines and Symbols.
HyDraw CAD uses
DASHED Linetype for Drain and Control connection lines.
PHANTOM Linetype for Envelope.
To make the Linetype per HyDraw, follow the given steps:
Type LINETYPE in the Command Line.
The Linetype Manager dialog displays.
2. Select DASHED and change the Global scale factor to-
0.125 for Inch
- 4 for mm
3. Click Load.
The Linetype Manager dialog displays.
4. Select the DASHED linetype from the HyDraw.lin file.
5. Click OK.
The Linetypes - Reloaded Linetypes dialog displays.
6. Select Reload the linetype, DASHED.
7. Type REGEN in the Command line.
Repeat the same process for PHANTOM linetype.
Related Articles
When running the ATTSYNC command, my display properties disappear
Problem: Upon running the ATTSYNC command from the command line, the display properties of a symbol disappear. Solution: There is currently a limitation in handling the display properties of symbols with the ATTSYNC command. The display property can ...How do I display the line weight for connection lines?
Type “LINEWEIGHT” on the command line. The Line Weight Settings dialog box is displayed. By default the ‘Display Lineweight’ checkbox is deselected. Select the Display 'Lineweight’ checkbox and click OK. Set the Line Weight value inside HyDraw ...When opening a drawing, my lines are suddenly very thick. What happened?
Issue: When opening a drawing, the lines are suddenly very thick. Solution: This is due to the lineweight being displayed. To turn the lines back to normal, type LWEIGHT into the command line and uncheck the 'Display Lineweight' check boxThe Command Line is not visible. How do I display the Command Line?
Press “CTRL+9” to display the command line.How to backup and restore HyDraw CAD Library MS Access version?
The attached PDF outlines the process required to create database backups or restore for HyDraw CAD when utilizing the Microsoft Access Database.