Why can't I select a line/face/point/sketch etc?
The selection filter may be limiting what you may select.
To check the selection filter, press F5. In the bottom of the screen you will see selection filter options.
Check the first icon starting from the left and make sure it is not selected. This deactivates the selection filter.
The selection filter menu can also be accessed from View > Toolbars > Selection Filter
Related Articles
Using Solidworks 2019 and MDTools 965/960, the machining tables does not come through with the border grid line. What is the solution?
Applicable with MDTools 960/965 with SW 2019: In the 2D drawing, the Machining tables display without grid border line. Workaround: Select the table. From the context menu, select Properties. From the Model Browser, change the Border Grid to ...Need to manually define planes to define single body CAD models to set Assembly Constraints
Unable to directly set constraints for single body CAD models by using MDTools the Assembly Constraints command. It displays the following message. How to fix this? To constrain the single body: Define the axis, Manually define the plane, click ...Setting up Inventor threads in your MDTools drawing template
Refer attached document for instructions.How do I fix exclamation marks in SOLIDWORKS Feature Manager Design tree?
The exclamation marks in the SOLIDWORKS Feature Manager Design tree are the result of unresolved sketch profiles; planes etc. that might have been created during the design process and need to be edited. To find out what these errors are: Make sure ...How can I get MDTools Library Manager to read custom outlines correctly?
Tips on preparation of custom outlines: Save the document as a text file in a desired location. Be careful selecting the center point when reading from the drawing file. Make sure your arcs are broken up into 180 degrees or less as MLM cannot ...