Zoom Extents not working for a Drawing

Zoom Extents not working for a Drawing

Resolve as follows:

  1. Type ERASE in the command line and write ALL.

  2. Write R and press Enter.
    It gives the prompt for Remove Objects.

  3. Select the schematic and press Enter.
    Zoom Extent will work fine.

There may be some invisible entities in the drawing file.
After applying the ERASE command on the whole drawing except schematic, Zoom Extent works fine.

 

 

    • Related Articles

    • How do I configure auto-saves and recover drawing files?

      Set the auto save time as required: Click the HyDraw Icon in the upper left hand corner. Then, click Options at the bottom of the pop-up screen. 3. Click the Open and Save tab. 4. Check the Automatic save box and set the time between saves. 5. Apply ...

    • HyDraw CAD Stops Working After Windows 11 Update to Version 24H4

      When updating Windows 11 to version 24H4, many users encountered issues with HyDraw CAD, particularly with the 2022 version. After the update, HyDraw CAD stopped working and displayed a fatal error message. To resolve this issue, a clean ...

    • When opening a file, HyDraw CAD continuously loads and never opens the file

      Problem: When opening a file, the blue loading bar appears at the bottom of the HyDraw CAD canvas, simulating that the file is opening: Ultimately, the file never opens and HyDraw CAD needs to be aborted. Solution: This is due to a corrupt entity ...

    • Every symbol inserted has an extra number 1 for each port.

      Reason: This can occur if there is an issue with block definition of ‘Port’ in the drawing. HyDraw CAD is displaying invisible attributes attached to the port symbol. How to fix the issue: 1. Create a new drawing. 2. Insert any symbol with a port ...

    • AutoCAD Specific Commands Used While Working in HyDraw

      1. Adding New Attributes and Changing Orientation in Block Editor To add new attributes inside Block Editor, use the ATTDEF (Attribute Definition) command. To change attribute orientation, use the Rotate command (RO) or modify attribute properties ...